BST-081

  • Steel/Poly hand pump is ideal for transferring a variety of liquids including detergents, acids, corrosives and many other chemicals compatible with plated steel and Poly.

  • Delivers capacity: 4oz. per stroke.

OPERATION

The pump is now ready for operation. Liquid should begin flowing on second of third upstroke. If slight leakage should occur, .Simply tighten packing nut on body head, excessive tightening will destroy the packing and cause more leaking.

INSTALLATION

1. Install adapter on to pump body threads down, attach tube to barbed end
2. Insert pump into 2”opening and screw adapter clockwise into drum.
3. Adjust pump height and tighten thumb screw into adapter by hand.(Don’t wrench or tool tighten)

SAFETY INSTRUCTION

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.
1. Improper use or installation of this product can cause serious bodily injury or death.
2. Do NOT smoke near pump or use pump near an open flame. Fire could result.
3. When pumping flammable liquids, all equipment must be grounded to prevent the accumulation of static electricity which may ignite vapors or gases.
4. The pump and containers should be connected using bonding clamps or clips and a conductive wire no smaller than 12 gauge. A secure and positive metal - to-metal contact must be made. The other end of the wire should be attached to a good ground, such as a steel building column or water pipe.
5. For use with refined petroleum products and fluid compatible with nitride and steel.

Warning :

  • This product should not be used for fluid transfer into aircraft. This product is not suited for use with fluids for human consumption or fluids containing water.

  • This pump is made from plated steel and Poly seals and should not be used with fluids affecting these materials. Pumps which have been used with corrosive material DO NOT qualify for warranty.

PRODUCTS

  • Steel/Poly hand pump is ideal for transferring a variety of liquids including detergents, acids, corrosives and many other chemicals compatible with plated steel and Poly.

  • Delivers capacity: 4oz. per stroke.

OPERATION

The pump is now ready for operation. Liquid should begin flowing on second of third upstroke. If slight leakage should occur, .Simply tighten packing nut on body head, excessive tightening will destroy the packing and cause more leaking.

INSTALLATION

1. Install adapter on to pump body threads down, attach tube to barbed end
2. Insert pump into 2”opening and screw adapter clockwise into drum.
3. Adjust pump height and tighten thumb screw into adapter by hand.(Don’t wrench or tool tighten)

SAFETY INSTRUCTION

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.
1. Improper use or installation of this product can cause serious bodily injury or death.
2. Do NOT smoke near pump or use pump near an open flame. Fire could result.
3. When pumping flammable liquids, all equipment must be grounded to prevent the accumulation of static electricity which may ignite vapors or gases.
4. The pump and containers should be connected using bonding clamps or clips and a conductive wire no smaller than 12 gauge. A secure and positive metal - to-metal contact must be made. The other end of the wire should be attached to a good ground, such as a steel building column or water pipe.
5. For use with refined petroleum products and fluid compatible with nitride and steel.

Warning :

  • This product should not be used for fluid transfer into aircraft. This product is not suited for use with fluids for human consumption or fluids containing water.

  • This pump is made from plated steel and Poly seals and should not be used with fluids affecting these materials. Pumps which have been used with corrosive material DO NOT qualify for warranty.